Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Pajaro
If your gate is dragging on the ground, won’t latch, or stopped cycling after the last storm, you’re in the right place. We repair and install gates for homeowners, HOA managers, and property owners throughout Pajaro, CA – and every one of us works on gates only, not as a sideline to garage doors or general handyman work. We know how these low-lying lots along the river behave after a wet winter, and we know why gates that hung straight in October suddenly won’t close in January. Call (888) 704-3384 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Gate problems in Pajaro are often caused by post and soil movement after storms, not failed hardware.
- Wrought iron and metal gate repair are our two biggest calls here.
- We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators.
- Our technicians have up to 15 years of experience, and the price is agreed in writing before any work starts.
Why Pajaro Homeowners Call Gate Repair Salinas for Gate Repair
Pajaro is a small community, and a gate is the front line of a property here. When a post leans after a flood cycle, you need someone who understands the ground it sits in, not just the latch that won’t catch. That’s the work of our gate repair team, and it’s the reason people in Pajaro call us.
We’re a gate-only specialist. Every technician, every tool, and every part is focused solely on gates. That matters when a repair turns out to be a footing problem rather than a hinge problem – we have the equipment to re-set a post properly instead of propping the panel back up and hoping it holds. Our technicians have up to 15 years of experience with residential and commercial gate systems, and we carry a strong local reputation across the Pajaro Valley.
Response time to Pajaro is quick because we work the nearby towns regularly. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. When you call, the price is quoted and agreed before any work begins, so there’s no invoice surprise at the finish.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Wrought Iron Gate Repair in Pajaro
Wrought Iron Gate Repair in Pajaro commonly means dealing with rust that reaches the hinge barrels and latch posts after repeated wet winters. Sustained moisture off the Pajaro Valley accelerates corrosion on steel, and the salt-heavy fog doesn’t help. A typical wrought iron gate repair here runs $250 – $750, depending on whether we’re treating surface rust or replacing a hinge plate that’s rusted through. The written estimate sets the final price, and the estimate itself is free.
Rust and hinge replacement
When a hinge barrel rusts solid, the gate binds and drags even if the panel is straight. We cut out the failed hinge, weld in a fresh one, and check travel across the full swing. Rust that has eaten into the frame near a weld is a bigger job, and we’ll show you what we find before recommending a fix.
Latch and strike realignment
Fog and floodwater swell and warp wood gate frames, which throws off latch alignment even on metal gates surrounding older Pajaro homes. We realign the latch and strike plate after correcting any post lean, so the gate catches cleanly without forcing it shut. If a post has moved, realigning the latch alone is a temporary patch, and we’ll say so.
Metal Gate Repair in Pajaro
Metal Gate Repair in Pajaro is most often needed on chain-link and steel driveway gates that took on floodwater and came back rusty. When the river overtops, metal picks up grit and silt that traps moisture against posts and welds. A typical metal gate repair runs $180 – $600, depending on whether we’re re-welding a frame, replacing a rusted post base, or realigning a gate that shifted with saturated soil. We measure, agree the price in writing, and then do the work.
Post footing and re-set
When a gate post sinks or leans in the soft floodplain soil, sagging the panel, we pull it, re-set the footing below the flood-scoured layer, and re-hang the gate square. This addresses the real problem rather than shimming the panel, which only hides the movement.
Frame welding and re-hanging
A metal frame with a cracked weld at a corner or a bent bar from wind load gets straightened and welded back solid. Solid infill gates catch a lot of wind, so we check the full frame for stress points before we sign off.
Trusted Brands We Service in Pajaro
We work on your brand, with the specific logic and components of each operator rather than a one-size-fits-all approach. In Pajaro we regularly service DoorKing, Elite, Viking, and Ghost Controls systems, alongside LiftMaster, FAAC, BFT, Linear, and Mighty Mule. Our technicians diagnose electric gate problems from motor to control board, including intercoms, sensors, and safety edges, and because we work repair and installation under one roof, one call covers both. We don’t stock parts locally – but with the brand identified up front, we can usually arrange a fast turnaround on the correct component.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Pajaro Homes
- Hinge post undermined by floodwater. Saturated soil settles and the post leans, so the gate sags and drags on the ground. The panel itself is often fine; the footing is the culprit.
- Wood frames swollen and warped. Sustained winter moisture swells wood gate frames on the older single-story lots here, so the latch no longer lines up and the gate won’t close cleanly.
- Rusted-through steel posts and hinges. Repeated inundation rusts steel through at the hinge and base, causing binding, squealing, and eventual failure at the hinge.
- Operators running but not moving the gate. After a flood, a gate operator can power up while the gate stays put – often a control board, limit switch, or safety sensor fault rather than the motor itself.
Pricing for Gate Repair in Pajaro, CA
Most gate repairs in Pajaro fall between $180 and $750, and you’ll know the number before we begin. Wrought iron hinge and latch work typically runs $250 – $750, metal gate repair $180 – $600, and realigning or re-setting a post that shifted in the floodplain soil usually sits in the middle of that range. What drives the price up is a footing re-set, a rusted-through section that needs welding, or an operator fault that needs a control board or sensor replaced. We give you a free written estimate that sets the final price, and the price is agreed before any work starts. Comparison shop if you like – a gate that’s dragging or won’t latch after a storm is worth getting fixed right.
We Also Serve Cities Near Pajaro
We serve Pajaro and the surrounding communities, including Las Lomas, Amesti, Freedom, and La Selva Beach. The same floodplain conditions that affect gates in Pajaro reach into these neighboring towns, so the repair approach carries over. If you’re nearby and your gate is dragging or won’t latch, we want to hear from you.
Serving Pajaro, CA – Our Local Coverage Area
We serve Pajaro and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pajaro
Because the post moved, not the panel. Pajaro sits on the river floodplain and was rebuilt after the March 2023 levee breach, so gate posts here sink and lean as saturated soil settles after each flood cycle – a gate that latched fine in the fall suddenly drags or won’t catch by winter. The fix is re-setting the footing below the flood-scoured layer and correcting sag at the hinge post. Call (888) 704-3384 for a free estimate – estimates are free.
Yes, if you do it correctly and the gate isn’t damaged. Most operators have a manual release – a keyed lever or a pull cord on the motor – that disengages the drive so you can push the gate by hand. Turn off power to the operator first, release slowly, move the gate by the frame rather than the leading edge, and keep clear of any pinch points and the travel path. On a slide gate, check it’s on its track before you move it. Once power returns, re-engage the drive and test the safety sensors before normal use. If a gate won’t release or won’t re-engage, that’s a repair call – call us.
The operator, control board, or safety circuit faulted, not the motor. After inundation the common failures are a flooded control board, a limit switch that no longer registers, a slipped drive chain or clutch, and safety photo-eyes knocked out of alignment – and many operators will run without cycling the arm when a safety input is tripped. We diagnose from motor to control board so you’re not replacing parts on a guess. Call (888) 704-3384 for an exact quote.
Look for a gate that drags, a post that sits visibly off plumb, or a gap that opens at the base after wet weather. Push gently against the post at the top: if it rocks or the soil around it has settled in a ring, the footing has lost bearing in the saturated ground. That’s the repair pattern tied to the floodplain, and it gets worse over winter. A free on-site estimate will confirm it before you commit – call us.
Yes – an automated gate should have working safety photo-eyes or edge sensors so it stops or reverses if something is in the path. After a flood or storm, those sensors are the first thing to check, because a knocked sensor will often stop the gate from cycling. We test and realign safety edges and sensors as part of electric gate repair. Call (888) 704-3384 for a free estimate.
When you’re ready, call (888) 704-3384 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Whether it’s a sagging gate that needs its footing re-set or an operator that won’t cycle after a storm, we’ll diagnose it, quote it in writing, and agree the price before we start.
Written by the team at Gate Repair Salinas.